Need help?Do you have a question about the Yamaha PC2002M and is the answer not in the manual?
General| Power Output per channel (4Ω) | 300W |
|---|---|
| Input Sensitivity | 1.23V |
| Signal to Noise Ratio | 120dB |
| Weight | 22 kg |
| Input Impedance | 20kΩ |
| Speaker Load Impedance | 4Ω - 8Ω |
| Type | Stereo Power Amplifier |
| Total Harmonic Distortion (alternative) | 0.03% (8Ω, 1kHz) |
| Frequency Response (alternative) | 10Hz - 20kHz |
Identifies and locates the main controls and indicators on the front panel.
Identifies and locates rear panel connectors for audio input, output, and mode selection.
Lists detailed performance parameters and electrical characteristics of the amplifier.
Presents graphical data illustrating amplifier performance like frequency response and THD.
Illustrates functional blocks, signal flow, and physical dimensions of the amplifier.
Step-by-step guide for removing external panels and accessing internal components.
Details on specific adjustments like power supply, idling current, and meter calibration.
Shows component placement and connections for various internal circuit boards.
Detailed electrical schematics for amplifier sections including power, audio, and control circuits.
Guide to identifying semiconductor leads and pin configurations used in the amplifier.
Comprehensive lists of components for various assemblies like electricity, chassis, panels, and radiators.
To Next Page
