To Next PageTo Next Page
Need help?Do you have a question about the Yamaha PW80(Z) and is the answer not in the manual?
General| Displacement | 79cc |
|---|---|
| Compression Ratio | 6.6:1 |
| Ignition System | CDI |
| Final Drive | Chain |
| Front Suspension | Telescopic fork |
| Rear Suspension | Swingarm |
| Front Brake | Drum |
| Rear Brake | Drum |
| Front Tire | 2.50-14 |
| Rear Tire | 3.00-12 |
| Engine Type | Air-cooled, 2-stroke, single cylinder |
| Starting System | Kick |
| Transmission | 3-speed automatic |
Guidance for parents regarding child operation of the motorcycle.
Hazards and precautions related to engine exhaust fumes.
Impact of accessories and cargo on motorcycle stability.
Information on the removable plate limiting engine power.
Operation and position of the 3-speed transmission shift pedal.
Location and operation of the rear brake pedal.
Procedure for removing and installing the fuel tank cap.
Inspection of the fuel tank breather hose before operation.
Checking and adding 2-stroke engine oil levels.
Operation of the fuel cock lever (ON, OFF, RES).
Function and operation of the starter (choke) lever.
Procedure for starting the engine using the kickstarter.
Warnings and precautions for handling the shock absorber assembly.
Steps for starting and warming up the engine.
How to shift gears in the 3-speed transmission.
Important procedures for the first 5 hours of engine operation.
Information on service tools provided for maintenance.
Schedule for regular maintenance and lubrication tasks.
Checking and replacing the spark plug for engine performance.
Procedure to remove the plate for full engine performance.
Steps for changing the transmission oil.
How to clean the air filter element for engine efficiency.
Procedure for cleaning the spark arrester.
Information on carburetor adjustment and maintenance.
Procedure for checking and adjusting engine idling speed.
How to adjust the free play in the throttle cable.
Details on approved tire sizes and pressure.
Points regarding spoke wheel inspection and maintenance.
How to adjust the free play of the brake lever.
How to adjust the free play of the brake pedal.
Inspecting brake shoe lining thickness for wear.
Steps to adjust the drive chain slack for proper operation.
Maintenance procedure for the drive chain.
How to check and lubricate throttle grip and cable.
Information on adjusting the autolube pump.
Maintenance for the brake pedal pivot.
Maintenance for the sidestand pivot.
How to check for wear in steering bearings.
Inspecting front and rear wheel bearings for play.
Precautions for safely supporting the motorcycle.
Procedure for removing and installing the front wheel.
Procedure for removing and installing the rear wheel.
Steps for installing the rear wheel.
General recommendations for cleaning and maintaining the motorcycle.
Guidelines for short-term and long-term motorcycle storage.
Location and importance of the VIN for identification.
Location and purpose of the model label for parts ordering.
