Yamaha RMAX WOLVERINE 2021 - Light Switch; Winch Switch (if Equipped)

5-16
5
EBU39410
Light switch“//”
Set the switch to “ ” to turn on the low
beam and the taillights.
Set the switch to “ ” to turn on the high
beam and the taillights.
Set the switch to “ ” to turn off the head-
lights and taillights.
NOTICE
ECB02061
Do not use the headlights with the engine
turned off for an extended period of time.
The battery may discharge to the point
that the electric starter will not have
enough power to crank the engine. If this
should happen, remove the battery and re-
charge it.
EBU39431
Winch switch “ / ” (if equipped)
This switch is used when operating the winch
(page 5-38). Read this manual and the Winch
Owner’s Manual completely before operating
the winch switch.
1. Light switch “ / / ”
11
1. Winch switch (if equipped)
11
UB4M13E0.book Page 16 Thursday, June 24, 2021 2:40 PM