5-24
5
To install the seat cushion, insert the projec-
tions on the rear of the seat cushion under the
seat frame, and then insert the projection on
the front of the cushion into the grommet
while pushing the cushion downward. Make
sure the seat is properly secured before start-
ing off. WARNING! If the seat is loose, the
passenger could fall.
[EWB04240]
EBU34993
Adjusting the driver seat position
The driver seat position can be adjusted to
suit the driver’s preference. WARNING! Nev-
er adjust the seat position while operating
the vehicle, otherwise the seat may sud-
denly change position, which may lead to
an accident.
[EWB03990]
To adjust the driver seat position, pull the
driver seat position adjusting lever upward
and move the seat to the desired position.
1. Passenger seat cushion
UB4M13E0.book Page 24 Thursday, June 24, 2021 2:40 PM
To Next Page
Loading...
