L
4-2
PRE-OPERATION CHECKS
/home/Imai/imai_data/YMC-om/AB9239_RT100-26/English/E-4.frame
NOTE:
Pre-operation checks should be made each time the machine is used. Such an inspection can be thoroughly accomplished
in a very short time, and the added safety it assures is more than worth the time involved.
If any item in the PRE-OPERATION CHECK is not working properly, have it inspected and repaired before operating
the machine.
Brake and clutch lever
pivots
¥ Check for smooth operation.
¥ Lubricate if necessary.
6-18
Sidestand pivot
¥ Check for smooth operation.
¥ Lubricate if necessary.
6-18
Chassis fasteners
¥ Check the tightness of all chassis nuts, bolts and screws.
¥ Tighten if necessary.
Ð
Fuel
¥ Check fuel level.
¥ Fill with fuel as required.
3-3
ITEM ROUTINE PAGE
To Next Page
Loading...
