Yamaha RX-A710 - Page 65

S2-2
DEST:U28
A/D conversion value
Destination
S2-2. DESTINATION
The destination of this unit is displayed.
S3. FACTORY PRESET
This menu is used to reserve/inhibit initialization of the back-up IC (EEPROM: IC83 on DIGITAL P.C.B.).
S3-1
PRESET:INH
S3-1
PRESET:RSRV
S3-1. PRESET INHIBIT (Initialization inhibited)
Initialization of the back-up IC is not executed. Select this sub-menu to protect the values set by the user.
S3-1. PRESET RESERVED (Initialization reserved)
Initialization of the back-up IC is reserved. (Actual initialization is executed the next time the power is
turned on.) To reset to the original factory settings or to reset the backup IC, select this sub-menu and
press the “MAIN ZONE
” key to turn off the power.
CAUTION: Before setting to the PRESET RESERVED, write down the existing preset memory content of the tuner. (This is
because setting to the PRESET RESERVED will cause the user memory content to be erased.)
Destination J U C R, S T K A B, G, F L
A/D conversion value
(3.3 V=255)
0 − 12 13 − 39 40 − 67 68 − 92 93 − 115 116 − 140 141 − 169 199 − 221 222 − 244
S2-3
DBG:255
S2-3. DEBUG
Not for service.
65
RX-V671/HTR-6064/RX-A710
RX-V671/HTR-6064/
RX-A710
DRAFT