Yamaha RX-V350 Service Manual (English)

Other manuals for Yamaha RX-V350

Questions and Answers:

J
Jennifer GreenSep 2, 2025
What to do if Yamaha RX-V350 Receiver fails to turn on?
- T
  Tammy JamesSep 2, 2025
  If your Yamaha Receiver fails to turn on or enters standby mode shortly after being powered on, there are several potential causes. First, ensure the power cord is securely connected. If that's not the issue, the protection circuitry might be activated; in this case, check all speaker wire connections to make sure they are secure and not touching anything else. Finally, if the unit has been exposed to a strong electric shock, try setting it to standby mode, disconnecting the power cord for 30 seconds, and then plugging it back in.
J
Jennifer GomezSep 1, 2025
Why are the surround speakers not working on my Yamaha Receiver?
- N
  Nathaniel MillerSep 1, 2025
  If you're not getting any sound from the surround speakers on your Yamaha Receiver, check if the output level of the surround speakers is set to minimum. If so, raise the output level. Also, if you are playing a monaural source with program 9, select another sound field program.
D
David RossAug 30, 2025
Why is there no sound from the center speaker on my Yamaha Receiver?
- J
  Jordan KingAug 31, 2025
  If you're not hearing any sound from the center speaker of your Yamaha Receiver, first ensure that the output level of the center speaker is not set to minimum; raise the level if necessary. Also, check that “SOUND 1A CENTER” on the set menu is not set to NON; select the appropriate mode for your center speaker. Finally, if you have selected one of the HiFi DSP programs (1 to 4, except for 5ch Stereo), select another sound field program.
L
Lucas GarciaAug 29, 2025
Why is there no sound from the subwoofer on my Yamaha RX-V350 Receiver?
- F
  Felicia LoganAug 29, 2025
  If you're not getting any sound from the subwoofer connected to your Yamaha Receiver, check the “SOUND 1D BASS” setting in the set menu. If you are playing a Dolby Digital or DTS signal, make sure it is set to SWFR or BOTH. If you are playing a 2-channel source, select BOTH.
J
Jay McclureAug 28, 2025
What does CHECK SP WIRES mean on my Yamaha RX-V350 Receiver?
- K
  kennethduffyAug 28, 2025
  If “CHECK SP WIRES” appears on the front panel display of your Yamaha Receiver, it indicates that the speaker cables are short-circuited. To resolve this, make sure all speaker cables are connected correctly.
M
Mckenzie FoleyAug 27, 2025
Why does the remote control not work with my Yamaha RX-V350?
- A
  Aaron WadeAug 27, 2025
  If the remote control for your Yamaha Receiver isn't working properly, make sure you're within a maximum range of 6 meters (20 feet) and no more than 30 degrees off-axis from the front panel. Also, reposition the unit if direct sunlight or lighting is striking the remote control sensor. Finally, replace all batteries if they are weak.
N
Natalie WeberAug 26, 2025
Why is there no sound from my Yamaha RX-V350?
- B
  blairjessicaAug 27, 2025
  If you're experiencing no sound from your Yamaha Receiver, start by checking all input and output cable connections to ensure they are properly connected; if the problem persists, the cables may be defective. Next, verify that you've selected the correct input source using INPUT l / h or 6CH INPUT (or the input selector buttons). Also, make sure the speaker connections are secure and that the proper front speakers are selected with SPEAKERS A/ B/OFF. Don't forget to check the volume level and ensure the unit isn't muted by pressing MUTE or any operation buttons. Finally, confirm that the source you're playing is compatible with the receiver.
F
Frank MejiaAug 25, 2025
How to fix Yamaha RX-V350 remote control that is not working?
- J
  Jasmine ThomasAug 26, 2025
  If your Yamaha Receiver's remote control isn't working properly, consider these potential solutions. Ensure you are within a maximum range of 6 m (20 feet) and no more than 30 degrees off-axis from the front panel. Reposition the unit if direct sunlight or lighting is interfering with the remote control sensor. Replace all batteries if they are weak. Also, verify that the manufacture code has been set correctly, and try setting another code of the same manufacturer.
B
Beverly AguilarAug 22, 2025
Why won't my Yamaha Receiver turn on?
- J
  Jennifer BensonAug 23, 2025
  If your Yamaha Receiver fails to turn on or enters standby mode shortly after being powered on, there are a few potential causes. Ensure the power cord is firmly connected. If that doesn't work, the protection circuitry might have been activated. In this case, check all speaker wire connections to ensure they are secure and not touching anything other than their respective connections. Also, if the unit has been exposed to a strong external electric shock, set it in standby mode, disconnect the power cord, plug it back in after 30 seconds, and then try using it normally.
K
Kimberly WilsonSep 13, 2025
How to reduce noise interference on my Yamaha RX-V350?

Yamaha RX-V350 Specifications

General

Channels	5.1
Dolby Digital	Yes
DTS	Yes
FM/AM Tuner	Yes
Impedance	6 ohms
Type	AV Receiver
Input Sensitivity	200 mV
Signal-To-Noise Ratio	100 dB
Total Harmonic Distortion	0.06%
Frequency Response	10Hz - 100kHz
Amplifier Type	Discrete
Power Output	100W per channel
Outputs	1 x Audio, 1 x Video
Surround Sound Formats	Dolby Digital, Dolby Pro Logic II, DTS
Input Impedance	47 kOhms
Audio Inputs/Outputs	RCA
Digital Audio Inputs	2 (1 x Optical, 1 x Coaxial)
Video Inputs/Outputs	Composite