To Next PageTo Next Page
Need help?Do you have a question about the Yamaha RX-V392 and is the answer not in the manual?
Comprehensive safety and operating instructions for unit usage, placement, and handling, covering 18 points.
Critical warnings regarding electric shock, fire risk, and exposure to rain or moisture.
Explains the meaning of the lightning flash and exclamation point symbols in safety instructions.
Warning against unauthorized modifications and compliance with FCC interference regulations.
Advice on maintaining hearing health by using safe volume levels and avoiding prolonged exposure.
Details on speaker channel outputs and power ratings for RX-V492 and RX-V392 models.
Highlights features like DSP, Dolby Pro Logic Surround, and sound field modes.
Essential safety measures and checks before operating the unit, including installation and cleaning.
Guidance on proper handling, cleaning, and storage to ensure unit longevity and safety.
Instructions for installing and replacing batteries in the remote control transmitter.
Information on the effective range and environmental conditions for remote control operation.
Overview of the unit's advanced audio capabilities, including DSP and Dolby Pro Logic.
Explanation of Dolby Pro Logic Surround decoding for multi-channel audio reproduction.
Guidance on choosing and configuring speakers for 5-speaker and 4-speaker setups.
Visual guide and advice on positioning main, center, and rear speakers for optimal sound.
Instructions for connecting various audio/video sources like turntables, VCRs, and tuners.
Notes on easily connecting YAMAHA components using numbered terminals.
Information on using switched AC outlets and the ground terminal for the turntable.
Detailed diagram and instructions for connecting main, center, and rear speakers.
Guidance on connecting subwoofers and options for center speaker setups.
Step-by-step instructions for connecting bare speaker wires to terminals.
Information on using banana plugs for speaker connections.
Description of center and subwoofer output terminals for external amplifiers.
Instructions for setting the impedance selector based on speaker requirements.
Guide to connecting indoor and outdoor FM/AM antennas for optimal reception.
Importance of connecting the GND terminal to a proper earth ground for safety and interference reduction.
Identification and labeling of controls on the RX-V492 front panel.
Identification and labeling of controls on the RX-V392 front panel.
Explains the function of power switch, speaker selectors, and headphone jack.
Describes input selector buttons and DSP program selectors for sound customization.
Details on using bass, treble, and balance controls for sound tuning.
Explains tuning modes, station memory, editing, and program selection.
Details on adjusting delay time, center, and rear speaker output levels.
Explanation of various indicators and displays on the unit's front panel.
Describes the function of STEREO, SLEEP, EFFECT OFF, AUTO, and MEMORY indicators.
Diagram and numbering of controls on the RX-V492 remote control.
Diagram and numbering of controls on the RX-V392 remote control.
Details on using remote keys for controlling unit functions like tuning, sleep, and input selection.
Information on controlling compatible YAMAHA tape decks and CD players with the remote.
Steps to prepare the unit and speakers for sound level balancing.
Detailed steps to adjust main, center, and rear speaker levels using test tones.
Guidance on choosing center channel modes (NORMAL, WIDE, PHANTOM) based on speaker setup.
How to fine-tune sound output levels and balance between speakers.
Specific steps to adjust the output levels of the center and rear speakers.
Instructions on how to cancel test tones and use the main volume control.
How to choose and play the desired audio/video source using the input selector buttons.
Steps for playing sources, adjusting volume, and using tone/DSP controls.
Steps to select and play a source for recording onto tape or MD.
Instructions for monitoring recording levels and using the TAPE (MD) MONITOR function.
How to choose between speaker systems A, B, or both using the SPEAKERS switches.
Detailed guide to adjusting bass, treble, and balance for sound customization.
Steps for automatically searching and tuning to radio stations.
Steps for manually tuning to specific radio frequencies.
How to tune to a station and save it to a preset memory location.
Instructions for selecting and listening to stored preset radio stations.
How the unit automatically tunes and stores FM stations with strong signals.
How to access and listen to stations stored via the automatic preset tuning function.
Step-by-step guide to exchange the positions of two preset radio stations.
Brief descriptions of available DSP sound field programs and their features.
How DSP programs combine with Dolby Pro Logic for enhanced surround sound.
How to select and turn on desired DSP programs for various audio sources.
Using the remote control transmitter to select and manage DSP programs.
Fine-tuning the output level of the center speaker for optimal balance.
Adjusting the output level of the rear speakers for immersive surround sound.
How to adjust the time difference for effect sounds from rear speakers.
Information on how delay time settings are memorized and important notes for RX-V492/RX-V392.
Instructions for setting the unit to automatically turn off after a specified time.
How to disable or cancel the active sleep timer function.
Solutions for problems like no power, no sound, or distorted audio output.
Troubleshooting tips for noisy FM reception, tuning issues, and remote transmitter malfunctions.
Detailed specifications for speaker output power, input sensitivity, and impedance.
Technical details regarding video signal types, levels, and frequency responses.
Technical data for FM/AM reception, selectivity, and general unit parameters.
Details on power supply, dimensions, weight, power consumption, and included accessories.
General
