Need help?Do you have a question about the Yamaha RX-V396RDS and is the answer not in the manual?
Explanation of the receiver's DSP capabilities including Dolby decoders.
Instructions on how to operate the unit using the infrared remote control and its limitations.
Detailed explanation of the buttons and controls located on the front panel of the unit.
Operation of power, display, and radio tuning functions on the front panel.
How to select input sources and adjust the volume level via the front panel.
Controls for headphones, speaker selection, and DSP program selection.
Controls for preset station tuning, editing, and mode selection.
Diagrams and instructions for optimal placement of main, rear, and center speakers.
Important safety precautions and general guidelines before making any connections.
Detailed steps for connecting speaker systems and power cords, and setting impedance.
How to connect audio sources like tape decks and CD players using analog signals.
How to connect external decoders using 6-channel audio input terminals.
Guide for connecting video sources like DVD players and TVs using various signal types.
Detailed steps for connecting speaker systems to the amplifier terminals.
Setting the impedance selector and connecting power supply cords.
Steps for connecting speaker wires to the main, rear, and center speaker terminals.
Explanation of how to set the impedance selector based on speaker configurations.
How to use the built-in test tone generator for speaker level adjustments.
Step-by-step guide for automatic radio station tuning.
Step-by-step guide for manual radio station tuning.
How to automatically store RDS stations into memory.
Steps to manually store up to 40 radio stations.
How to search for stations broadcasting specific program types.
How to adjust items within the SET MENU using the remote control.
Speaker setup options including CENTER SP, REAR SP, MAIN SP, and BASS OUT.
Adjusting the delay for the center channel sound.
Adjusting the time difference between main and effect sounds.
Adjusting the output levels for center, rear speakers, and subwoofer.
Troubleshooting common issues like power, normal operation, sound, and speaker problems.
Troubleshooting issues related to the remote control not working.
Troubleshooting FM stereo noise, distortion, tuning issues, and AM noise.
Detailed technical specifications for the audio output and processing.
To Next Page
General
