EasyManua.ls Logo

Yamaha RX-V392RDS - User Manual

Yamaha RX-V392RDS
43 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OWNER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
BRUKSANVISNING
MANUALE DI ISTRUZIONI
MANUAL DE INSTRUCCIONES
GEBRUIKSAANWIJZING
Natural Sound AV Receiver
Récepteur audiovisuel “Son Naturel”
Natural Sound AV-Receiver
Natural Sound AV-receiver
Sintonizzatore AV a suono naturale
Receptor AV de Sonido Natural
Natural Sound AV Ontvanger
R X-V492RDS
R X-V392RDS

Table of Contents

Questions and Answers

  • T
    Timothy WaltonAug 12, 2025
    What to do if my Yamaha RX-V392RDS has no sound?
    • L
      Laura FuentesAug 12, 2025
      If there's no sound or picture from your Yamaha Receiver, check the following: Ensure the output cords are connected properly (they may be defective if the problem persists). Select the appropriate input source using the input selector buttons. Make sure the SPEAKERS switches are correctly set to the ON position for the speakers you're using. Finally, verify that all speaker connections are secure.
  • J
    Jonathon NicholsAug 16, 2025
    Why is my Yamaha RX-V392RDS remote control not working?
    • B
      Bethany JacksonAug 16, 2025
      If the remote control transmitter for your Yamaha Receiver isn't working, make sure that direct sunlight or bright lighting isn't hitting the remote control sensor on the main unit; if so, change the unit's position. Also, check the batteries in the remote and replace them if they are weak.
  • E
    Elizabeth SchultzAug 19, 2025
    Why is sound only coming from one speaker on my Yamaha RX-V392RDS?
    • R
      Richard ButlerAug 19, 2025
      If your Yamaha Receiver only outputs sound from one side speaker, check the BALANCE control and adjust it to the appropriate position. Also, verify that the cord connections are correct, and if the problem continues, the cords may be defective.
  • J
    Joseph PhamAug 23, 2025
    Why is there no sound from center speaker on Yamaha Receiver?
    • C
      Christopher JacksonAug 23, 2025
      If there is no sound from the center speaker of your Yamaha Receiver, first raise the sound output level to the center speaker. If that doesn't work, check if the center channel mode is in PHANTOM mode and select NORMAL or WIDE. Finally, ensure you've selected the appropriate sound field program.
  • J
    Judith TerryAug 27, 2025
    Why is there no sound from rear speakers on Yamaha Receiver?
    • K
      kenneth28Aug 27, 2025
      If there is no sound from the rear speakers of your Yamaha Receiver, first raise the sound output level to the rear speakers. Also, if you are playing a monaural sound source in DOLBY PRO LOGIC or DOLBY PRO LOGIC ENHANCED mode, select another program suitable for the monaural sound source.
  • J
    James SimpsonAug 30, 2025
    How to fix Yamaha Receiver that fails to turn on?
    • J
      Jessica HensonAug 30, 2025
      If your Yamaha Receiver fails to turn on or turns off suddenly, ensure the power cord is firmly plugged in. Also, check that the IMPEDANCE SELECTOR switch on the rear panel is set correctly to either the upper or lower end.
  • R
    reyesbrookeSep 3, 2025
    How to stop Yamaha RX-V392RDS from humming?
    • K
      Kristina McbrideSep 3, 2025
      If your Yamaha Receiver is producing a humming sound, firmly connect the audio plugs. If the problem persists, the cords may be defective. Also, if you are using a turntable, ensure there is a GND connection between the turntable and the unit.
  • V
    Vanessa BeanSep 7, 2025
    What to do if preset stations disappeared on Yamaha Receiver?
    • D
      diaznancySep 7, 2025
      If previously preset stations can no longer be tuned in on your Yamaha Receiver, and the unit has been unplugged for a long period, repeat the presetting procedure.

Summary

SPEAKER SETUP

5-Speaker Configuration

Recommended setup using main, center, and rear speakers for best performance.

SPEAKER PLACEMENT

Guidelines for positioning main, center, and rear speakers for optimal sound.

CONNECTIONS

CONNECTIONS WITH OTHER COMPONENTS

Instructions for connecting the AV receiver to various external audio and video devices.

CONTROLS AND THEIR FUNCTIONS

FRONT PANEL

SPEAKER BALANCE ADJUSTMENT

BASIC OPERATIONS

TO PLAY A SOURCE

TUNING OPERATIONS

PRESET TUNING

USING DIGITAL SOUND FIELD PROCESSOR (DSP)

To play a source with the digital sound field processor

Adjustment of the CENTER LEVEL

Adjustment of the REAR LEVEL

Adjustment of DELAY TIME

TROUBLESHOOTING

Yamaha RX-V392RDS Specifications

General IconGeneral
Total Harmonic Distortion0.015% (20Hz-20kHz, 65W)
Dimensions (W x H x D)435 x 151 x 363 mm
Tuner TypeAM/FM
Video Inputs/OutputsComposite
Output Power per Channel65W (8 ohms, 20Hz-20kHz, 0.015% THD)

Related product manuals