Need help?Do you have a question about the Yamaha S112 and is the answer not in the manual?
General| Configuration | 2-Way |
|---|---|
| Impedance | 8 Ohms |
| Frequency Response | 65Hz - 16kHz |
| Tweeter Material | Titanium |
| Crossover Frequency | 2kHz |
| Type | Speaker |
| LF Driver Size | 12 inches |
Wiring instructions for the UK mains lead, detailing color codes for grounding.
Essential safety guidelines for operation, maintenance, and potential hazards.
Advice on avoiding hazardous locations and ensuring proper ventilation.
Warnings about power, modification, grounding, and general care.
Details on the backup battery, its life, and replacement procedures.
Explanation of the front panel knobs, buttons, and displays.
Description of rear panel jacks and their functions.
Guidelines for connecting speakers to different amplifier models and impedance.
Step-by-step guide to get initial sound output from the amplifier.
Procedure for setting the guitar's output level to the amplifier's input.
Guidance on selecting amp types, tone controls, reverb, and effects.
How to recall saved sound settings from memory.
How to save current sound settings into memory.
Procedure to reset all memory to factory presets.
Recalling amplifier settings using MIDI commands.
Controlling amplifier volume via MIDI.
Adjusting effects (Reverb, Tremolo, Chorus, Tape Echo) using MIDI.
Explanation of the speaker simulator function for line out signals.
Mapping MIDI program changes to memory numbers.
Configuring the amplifier's MIDI input channel.
Enabling MIDI data pass-through.
Backing up and restoring internal memory via MIDI.
Copying data between DG amplifiers via MIDI.
Enabling or disabling the speaker simulator function.
Defining where MIDI volume control takes effect.
Error related to volume knob position during recall.
Errors related to MIDI buffer, communication, and bulk data integrity.
Warning for depleted backup battery power.
Details on digital/analog sections, MIDI, controls, jacks, and indicators.
Technical specs for outputs, power requirements, and consumption.
Physical size and weight of the amplifier models.
Specifications and usage for the S412V speaker enclosure.
Specifications and usage for the S112 speaker enclosure.
Instructions for connecting the S412V/S112 to an amplifier.
To Next Page
