Yamaha SR400 - Page 32

For your safety – pre-operation checks
4-2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Drive chain
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
6-25,
6-26
Wheels and tires
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
6-15,
6-17
Shift pedal
• Make sure that operation is smooth.
• Correct if necessary.
6-21
Brake pedal
• Make sure that operation is smooth.
• Lubricate pedal pivoting point if necessary.
6-28
Brake and clutch
levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
6-28
Centerstand, sidestand
• Make sure that operation is smooth.
• Lubricate pivots if necessary.
6-29
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly
tightened.
• Tighten if necessary.
—
Instruments, lights,
signals and switches
• Check operation.
• Correct if necessary.
—
Sidestand switch
• Check operation of ignition circuit cut-off system.
• If system is not working correctly, have Yamaha dealer
check vehicle.
3-14
ITEM CHECKS PAGE
2RD-28199-E1.book 2 ページ ２０１５年９月３日 木曜日 午後３時４２分