To Next PageTo Next Page
Need help?Do you have a question about the Yamaha SU200 and is the answer not in the manual?
General| Type | Sampler |
|---|---|
| Sampling Rate | 44.1 kHz |
| Bit Depth | 16-bit |
| MIDI | In/Out |
| Sequencer | Yes |
| Tempo | 40 - 240 BPM |
| Display | LCD |
| Effects | Delay |
| Power | AC Adapter |
Important warnings and guidelines for battery usage, replacement, and disposal.
Yamaha reserves the right to change specifications without notice.
Information on where to find the product's name plate for serial numbers.
Basic precautions to avoid injury, damage, fire, or other hazards from electrical shock.
Precautions to avoid physical injury or damage to the instrument and property.
Yamaha's recommendation for saving and storing music data using memory cards.
Lists the items included in the SU200 package.
Guidance on navigating and understanding the manual's structure and content.
Explains the process of recording and storing sounds as samples.
Details various playback options like loop and reverse play.
Introduces the ability to delete unplayed parts of samples.
Explains unison loop playback and powerful effects/filters.
Covers backlit display, pads, memory card slot, and battery operation.
Diagram and overview of the SU200's front panel components.
Description of all input/output jacks and connectors on the SU200's rear panel.
Details the various indicators and information shown on the SU200's display screen.
Instructions for connecting AC adapter or installing batteries for power.
Steps for turning the unit on, adjusting volume, and powering down.
Explanation of the Sampler, Effector/Filter, and Controller blocks.
Describes Pad-Play, Sampling, and Job modes.
How to connect, power on, and play the default samples.
Basic instructions for applying effects and using the ribbon controller.
Introduction to playing multiple loop samples simultaneously.
How to pass external audio through the SU200 with effects.
Step-by-step guide to recording a voice sample.
Detailed steps for recording using automatic trigger level detection.
Detailed steps for recording with manual start/stop control.
Instructions for recording the SU200's output as a new sample.
How to set pads to play as gate, trigger, one-shot, or loop.
How to set playback direction and sample range.
Features for applying settings to specific pads and playing multiple loops.
Procedure for removing a complete sample from memory.
Procedure for deleting unused parts of a sample using start/end points.
How to select pads and apply effects or filters.
Detailed explanation of Loop Remix, Slice, and Tech Mod effects.
Detailed explanation of Dist/Lo-Fi, Delay, Filter, Scratch, and Time effects.
Overview of MIDI, channels, and how SU200 uses MIDI for clock and control.
Guide to configuring MIDI clock source and receive channel.
Precautions for handling cards and the process of formatting.
Instructions for saving samples using Volume Save or Wave Export.
Instructions for loading samples via Volume Load, Wave Import, or Sample Load.
Procedures for removing files or reformatting memory cards.
How to play samples at different pitches.
How to adjust sample tempo to match another sample.
Features for duplicating samples and adjusting pad volumes.
How to prevent accidental modification or deletion of stored data.
Explains common messages like 'Battry Low', 'Memory Full', etc.
Provides solutions for problems like no sound, distorted sound, and recording errors.
Lists key technical details like polyphony, sampling rates, and dimensions.
Details MIDI messages transmitted and recognized by the SU200.
