To Next PageTo Next Page
Need help?Do you have a question about the Yamaha SEQTRAK and is the answer not in the manual?
General| Sampling | Yes |
|---|---|
| Effects Types | Reverb, Delay, Distortion |
| Connectivity | MIDI, USB, Audio In/Out, Headphones |
| Storage | Internal |
| Power | USB |
| Patterns | 128 patterns |
| Songs | 16 |
Lists the manuals available for the product and their purpose.
Explains the terms and symbols used throughout the guide.
Explains the drum section for producing rhythm parts using track knobs and drum keys.
Details the synth section for producing melody parts using track knobs and synth keys.
Covers changing sound, adjusting parameters, and manipulating effects.
Defines a project as a unit of song data, detailing capacity and contents.
Describes a track as a component of a project for assigning a single sound.
Explains patterns as phrases played in a loop, switchable per track.
Provides instructions on how to get the iOS, iPadOS, Android, Windows, and Mac versions.
Guides users on establishing a connection between the SEQTRAK unit and the app.
Details the functions of the [VOL+/-], [DELETE], [MUTE], and [SOLO] buttons on the left panel.
Covers controls like [ALL] knob, Track knobs, Drum keys, Record key, Synth keys, [BAR LENGTH] button.
Covers controls like Index, Global Meter, UNDO/REDO, Sound Design knobs, and FX controls.
Introduces controls located on the right side of the unit.
Explains the process of charging the SEQTRAK using a USB power adapter or mobile battery.
Lists the required voltage and current specifications for USB power sources.
Describes how to check battery status and charging indicators while the unit is on.
Explains how to check charging status when the unit is powered off.
Details the procedure for powering the SEQTRAK on and off.
Explains how to force power off in case of abnormal operation.
Describes the auto power off function and how to enable/disable it.
Guides users on how to switch between the available projects.
Explains that projects are saved automatically when the unit is turned off or switched.
Describes how to save and recall projects using the SEQTRAK app.
Provides steps to delete a project from the SEQTRAK unit.
Explains how to change the project tempo using BPM +/- buttons.
Guides on how to apply a swing feel to the project's rhythm.
Explains how to activate or deactivate the metronome.
Details methods for switching between patterns using Track knobs or Drum keys.
Explains how to switch patterns instantly or with reserved switching.
Describes switching patterns using Drum keys for reserved switching.
Explains how to adjust the Launch Quantize steps for pattern switching.
Explains changing drum pattern length using PAGE button and Drum Track knob.
Covers changing synth/sampler pattern length with BAR LENGTH button.
Explains using category jump to quickly select sounds by category.
Details the procedure to mute a selected track.
Explains how to solo a track, muting all others.
Explains how to turn individual steps on or off for drum tracks.
Details how to switch between pages of steps displayed on the Drum keys.
Explains real-time input for synth tracks using synth keys.
Explains real-time input for the SAMPLER track.
Details how to sample sounds using microphone or audio input.
Explains how to select tracks and use knobs to adjust sound parameters.
Details how to switch between different parameter pages and advanced settings.
Lists the adjustable sound parameters for Drum tracks.
Lists the adjustable sound parameters for Synth 1 and Synth 2 tracks.
Lists the adjustable sound parameters for the DX synth track.
Lists the adjustable sound parameters for the Sampler track.
Details how to delete recorded motion data.
Explains track effects, send effects, and master effects.
Details the types and order of track effects (Single, LP-HP Filter, EQ).
Explains shared send effects like Delay and Reverb and their parameters.
Details master effects like High Pass, Repeater, Compressor, and EQ.
Explains using the MASTER/SINGLE switch for effect control.
Details how to change the effect type using the FX knob.
Explains adjusting parameters using touch sliders and FX Page button.
Lists effect parameters for MASTER mode across different pages.
Lists effect parameters for SINGLE mode across different pages.
Details how to switch to Mixer Mode from other modes.
Explains selecting and adjusting parameters like PAN, VOLUME, REVERB SEND.
Covers changing and adjusting Reverb and Delay send effects.
Details how to switch to Song Mode.
Explains switching to scene mode from Song mode.
Covers playing and stopping scenes in Song and scene modes.
Explains how to select and change the scene for playback.
Explains how to change the pattern combination for a selected scene.
Details how to adjust the length of a scene in Song mode.
Explains using the GUI Editor for advanced sound and effect settings.
Details managing projects, sounds, and creating new projects via the app.
Covers creating 3D objects and visual effects that respond to performance.
Explains using the tutorial function for better understanding of operations.
Explains wired and wireless connection methods to the SEQTRAK app.
Details the process of connecting SEQTRAK to devices via USB-C cable.
Explains how to establish a Bluetooth connection with the SEQTRAK app.
Details making a Wi-Fi connection for app functions.
Details connecting to MIDI devices using a USB-C to USB-C cable.
Explains using a MIDI conversion cable for MIDI device connection.
Details connecting SEQTRAK to a Windows computer.
Details connecting SEQTRAK to a Mac computer.
Explains how to restore the unit to its factory default settings.
Details how to adjust track knob sensitivity via the app.
Covers MIDI settings like clock and output filters.
Details updating firmware using a USB flash drive.
Explains how to format a USB flash drive for firmware updates.
Guides on performing the firmware update from a USB drive.
Explains updating firmware via a wired connection using the SEQTRAK app.
Details updating firmware via a wireless connection using the SEQTRAK app.
Lists detailed technical specifications of the SEQTRAK unit.
Lists MIDI channels and their corresponding track names.
Details MIDI Control Change parameters for sound design.
Lists CC numbers, channels, and ranges for effect parameters.
Details CC parameters for Mute and Solo functions.
Lists Filter presets with their parameters.
Lists Reverb presets with their parameters.
Lists Delay presets with their parameters.
Lists Compressor presets with their parameters.
Lists Distortion presets with their parameters.
Lists Modulation presets with their parameters.
Lists Ducker presets with their parameters.
Lists Filter presets with their parameters.
Lists Reverb presets with their parameters.
Lists Delay presets with their parameters.
Lists Compressor presets with their parameters.
Lists Distortion presets with their parameters.
Lists Modulation presets with their parameters.
Lists Ducker presets with their parameters.
Lists Reverb send effect presets with their parameters.
Lists Delay send effect presets with their parameters.
