SEQTRAK User Guide
13. SEQTRAK App
The four main functions of the SEQTRAK app are described below. For details about how to
obtain the SEQTRAK app, see “1.4.1 Obtaining the SEQTRAK app.” For details about how to
connect the SEQTRAK app to SEQTRAK, see “14.1 Connecting to the SEQTRAK App.”
*The screens from the SEQTRAK app shown in this section are for the iOS version. The
design of the app is subject to change without notice.
13.1 GUI Functions [GUI EDITOR]
You can use this function to make advanced settings on the app screen, such as for sound
design and effect parameters. It provides access to more parameters than are available on
SEQTRAK. For example, you can adjust the LFOs on each track, assign alternate sound
groups that stop certain sounds between two Drum tracks (such as open and closed hi-
hats), and all of the parameters for the FM engine on the DX track.
The app screen automatically changes to match the operation of SEQTRAK.
NOTE
・ You can also configure advanced settings for the parameters in Mixer mode and Song
mode.
To Next Page
Loading...
Need help?
General
