Yamaha SEQTRAK - Effect parameters when MASTER is selected; Effect parameters when SINGLE is selected; Minimizing the Level of Effect Parameters (CLEAR FX)

SEQTRAK User Guide
66
10.2.4 Effect parameters when MASTER is selected
Page
Touch Slider
Parameter
1
FX LEVEL
MASTER EFFECT PARAMETER 1
HIGH PASS
HIGH PASS FILTER CUTOFF
REPEATER
BEAT REPEAT LENGTH
2
FX LEVEL
MASTER EFFECT PARAMETER 1
HIGH PASS
MASTER EFFECT PARAMETER 2
REPEATER
MASTER EFFECT PARAMETER 3
10.2.5 Effect parameters when SINGLE is selected
Page
Touch Slider
Parameter
1
FX LEVEL SINGLE EFFECT PARAMETER 1
HIGH PASS
HIGH PASS FILTER CUTOFF
REPEATER
BEAT REPEAT LENGTH
2
FX LEVEL
SINGLE EFFECT PARAMETER 1
HIGH PASS
SINGLE EFFECT PARAMETER 2
REPEATER
SINGLE EFFECT PARAMETER 3
10.2.6 Example: Parameters when MASTER is selected and preset No. 1 [LPF - NO
RESONANCE] of FILTER is selected
Page Touch Slider Parameter
1
FX LEVEL
CUTOFF
HIGH PASS HIGH PASS FILTER CUTOFF
REPEATER
BEAT REPEAT LENGTH
2
FX LEVEL CUTOFF
HIGH PASS
RESONANCE
REPEATER OUTPUT LEVEL
NOTE
・ For a list of presets, see “17.4 MASTER EFFECT Presets” and “17.5 SINGLE EFFECT
Presets.”
10.3 Minimizing the Level of Effect Parameters (CLEAR FX)
Press the [CLEAR FX] button to minimize the level of the currently selected effect parameter.