Yamaha TW-E7A - Page 53

3 Once the indicator starts flashing, press the function key on the earphone (L) three
times within 10 seconds.
The earphone will initialize after several seconds, and the indicator flashes as shown below.
After initialization, the earphone will automatically enter pairing mode.
33
1
1
2
2
Purple Flashes
(two times)
Blue
Flashing
Blue Red
Flashes alternately
4 Hold down the function key on earphone (R) for about 10 seconds.
and the indicator flashes as shown below.
Purple
Flashing
10 sec
53
Troubleshooting > Restoring this product to factory defaults (Initialize / Reset)