5 Once the indicator starts flashing, press the function key on earphone (R) three
times within 10 seconds.
The earphone will initialize after several seconds, and the indicator flashes as shown below.
After initialization, a connection will automatically be made with the earphone (L).
Purple Flashes
(two times)
Blue
Flashing
Blue
Lights up (20 sec)
If after several seconds the indicator displays as shown below, initialization was successful. If the indicators
are not displaying as shown, try initializing once more from step 1.
Blue
20 sec
Blue Red
Flashes alternately
Earphone (R) Earphone (L)
54
Troubleshooting > Restoring this product to factory defaults (Initialize / Reset)
To Next Page
Loading...
