IMPORTANT NOTICE
This manual has been provided for the use of authorized Yamaha Retailers and their service personnel.
It has been assumed that basic service procedures inherent to the industry, and more specifi cally Yamaha Products, are already known
and understood by the users, and have therefore not been restated.
WARNING:
Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury,
destruction of expensive components, and failure of the product to perform as specifi ed. For these reasons, we advise
all Yamaha product owners that any service required should be performed by an authorized Yamaha Retailer or the
appointed service representative.
IMPORTANT:
The presentation or sale of this manual to any individual or fi rm does not constitute authorization, certifi cation or
recognition of any applicable technical capabilities, or establish a principle-agent relationship of any form.
The data provided is believed to be accurate and applicable to the unit(s) indicated on the cover. The research, engineering, and service
departments of Yamaha are continually striving to improve Yamaha products. Modifi cations are, therefore, inevitable and specifi cations
are subject to change without notice or obligation to retrofi t. Should any discrepancy appear to exist, please contact the distributor's
Service Division.
WARNING:
Static discharges can destroy expensive components. Discharge any static electricity your body may have
accumulated by grounding yourself to the ground buss in the unit (heavy gauge black wires connect to this buss).
IMPORTANT:
Turn the unit OFF during disassembly and part replacement. Recheck all work before you apply power to the unit.
SERVICE MANUAL
■ CONTENTS
TO SERVICE PERSONNEL ............................................2
FRONT PANELS .............................................................4
REAR PANELS ...............................................................6
REMOTE CONTROL PANEL ..........................................9
SPECIFICATIONS /
参考仕様
....................................... 10
INTERNAL VIEW .......................................................... 14
SERVICE PRECAUTIONS /
サービス時の注意事項
..... 14
DISASSEMBLY PROCEDURES /
分解手順
................. 15
UPDATING FIRMWARE /
ファームウェアのアップデート
..................................23
SELF-DIAGNOSTIC FUNCTION /
ダイアグ（自己診断機能）
...........................................26
IC DATA .........................................................................30
BLOCK DIAGRAMS ......................................................34
WIRING DIAGRAM .......................................................37
PRINTED CIRCUIT BOARDS .......................................38
PIN CONNECTION DIAGRAMS ...................................46
SCHEMATIC DIAGRAMS .............................................47
REPLACEMENT PARTS LIST ......................................53
REMOTE CONTROL ..................................................... 74
WIRELESS STREAMING PRE-AMPLIFIER
WIRELESS STREAMING AMPLIFIER/
P.O.Box 1, Hamamatsu, Japan
'16.07
Copyright (c) Yamaha Corporation All rights reserved.
This manual is copyrighted by Yamaha and may not be copied or
redistributed either in print or electronically without permission.
101376
WXA-50/WXC-50
Note: WXA-50: U, C, V, S models
When replacing the “amplifier and power module” of this unit with a new service part, make sure to replace the “jumper wire” for
switching the input voltage located on the P.C.B. of the “amplifier and power module”.
For details, refer to “DISASSEMBLY PROCEDURES: 6. Removal of Amplifier and Power Module”.
注意： WXA-50
本機の “アンプ／電源モジュール” を新しいサービスパーツに交換する場合、必ず “アンプ／電源モジュール” の基板上にある入
力電圧切替の “ジャンパー線” を入れ替えてください。
詳細は、“分解手順：6.アンプ／電源モジュールの外し方” を参照してください。
WXA-50/WXC-50
To Next Page
General
Weight and Dimensions
