Need help?Do you have a question about the Yamaha YSP-4000 and is the answer not in the manual?
General| Type | Digital sound projector |
|---|---|
| Amplifier | Yes |
| HDMI | Yes |
| Audio Channels | 5.1 |
| HDMI Inputs | 2 |
| Optical Digital Inputs | 2 |
| Analog Audio Inputs | 3 |
| Subwoofer Output | Yes |
| Built-in Decoders | Dolby Digital, DTS |
| Total Power Output | 120 Watts |
| Dimensions (W x H x D) | 1030 x 132 x 152 mm |
Warning about electrical shock and not opening the unit.
Detailed precautions for installation, operation, and maintenance.
Specific warnings about rain, moisture, and earthing connection.
Core safety instructions to prevent fire, shock, and damage.
Advises on choosing an optimal location for sound beam reflection and ventilation.
Describes how to install the unit using optional brackets, racks, or stands.
Lists all available audio/video input/output terminals on the unit.
Details the types of cables required for audio, video, and subwoofer connections.
Illustrates how to connect components using HDMI cables for optimal quality.
Details how to connect the unit to a TV via analog and digital audio/video.
Explains connections for DVD players/recorders via analog and digital audio/video.
Describes how to connect satellite/cable TV tuners via analog and digital.
Details connections for digital airwave tuners via analog and digital.
Covers connections for various digital and analog external devices.
Details how to connect a subwoofer for enhanced bass.
Describes how to connect the unit to the AC power outlet.
Explains the IntelliBeam technology for automatic sound optimization.
Instructions for connecting and placing the IntelliBeam microphone correctly.
Detailed steps for starting and configuring AUTO SETUP.
Options for choosing between BEAM+SOUND, BEAM only, or SOUND only optimization.
How to interpret the results displayed on the TV after AUTO SETUP.
Lists potential errors before AUTO SETUP begins and their remedies.
Lists errors that may occur during AUTO SETUP and how to resolve them.
Lists parameters for adjusting sound output levels and quality.
Lists parameters for adjusting sound beam output and listening environment.
Lists parameters for managing audio and video input settings.
Lists parameters for adjusting display settings.
General steps to access and adjust settings via manual setup.
Adjusts listening room and position settings for beam optimization.
Sets the unit's installation position (flat or corner).
Details installation position settings and manual beam adjustments.
Adjusts the horizontal and vertical angles of sound beams.
Sets beam travel distance, focal length, and delay.
Adjusts the high-frequency output level for each channel.
Adjusts sound direction for better center imaging.
Adjusts the tonal quality of sound beams (treble and bass).
Adjusts various subwoofer settings like bass out and distance.
Covers various sound output and room adjustment settings.
Adjusts dynamic range compression and bass enhancement.
Assigns jacks to specific components for input selection.
Selects input mode and adjusts input signal levels.
Changes input names and configures HDMI output settings.
Configures HDMI video information, up-scaling, aspect ratio, and control.
Adjusts front panel display settings like brightness and scrolling.
Adjusts OSD display position and time.
Adjusts OSD position and display duration.
How to use test tones to manually balance channel levels.
Adjusts the volume level of individual channels using test tones.
Manually adjusts channel levels using audio from a source like DVD.
Protects saved settings from accidental erasure or modification.
Sets the maximum volume level to prevent output beyond a limit.
Sets the initial volume level when the unit is turned on.
Activates/deactivates monitor check for HDMI video signal resolution.
Tests sound beam output to experience the sound beam.
Disables front panel keys except during system parameter adjustment.
Disables front panel keys except for parameter adjustment.
Resets all unit parameters to factory presets.
Cancels or performs the factory reset procedure.
Addresses common issues like power, standby mode, and no sound.
To Next Page
