To Next PageTo Next Page
Need help?Do you have a question about the Yamaha YSP-600 and is the answer not in the manual?
Explains the meaning of safety symbols used in the manual.
Provides FCC compliance information for US users.
Describes the core technology for multi-channel surround sound.
Lists supported audio formats like Dolby Digital and DTS.
Details the buttons and jacks on the front of the unit.
Explains the meaning of the unit's front panel indicators.
Identifies all input and output jacks on the rear of the unit.
Describes the buttons and operations of the remote control.
Provides recommendations for optimal listening room placement.
Guides on parallel and corner installation methods.
Illustrates various placement options for the unit.
Explains how to install the unit in a standard audio rack.
Details cables and connection priorities.
Guides on connecting via HDMI cables for audio and video.
Instructions for connecting the unit to a television.
Steps for connecting a DVD player or recorder.
How to connect digital satellite or cable TV tuners.
Instructions for connecting a digital airwave tuner.
Steps for connecting a VCR via analog audio.
General guidance for connecting other devices.
Instructions for connecting a subwoofer for enhanced bass.
Final step to connect the unit to mains power.
Guide on inserting batteries into the remote control.
Information on the effective range and angle for the remote.
How to power the unit on, off, and set to standby mode.
Steps to display the unit's menu on your TV screen.
Visual guide to the overall setup procedure.
Optimizes beam angle for the listening environment.
Optimizes delay, volume, and quality for sound.
Diagram showing the steps of the auto setup process.
Instructions for correctly placing the microphone.
Steps to start and run the auto setup procedure.
Guide to assembling the provided microphone stand.
Troubleshooting common errors during auto setup.
Explains saving settings for different listening environments.
Procedure to save current settings into memory.
Procedure to recall saved settings.
How to choose the audio source for playback.
Steps to play audio from selected sources.
How to increase or decrease the audio volume.
How to mute or unmute the audio output.
Ideal mode for multi-channel sources and 2-channel upmix.
Combines stereo with center and surround beams.
Enables surround in small listening areas.
For wide listening areas or when wall reflection is limited.
Explains front panel indicators for audio decoders.
Recommended sources for different surround modes.
How to decode 2-channel audio for surround playback.
Instructions for getting surround sound from TV audio.
Fine-tuning settings for Dolby Pro Logic II and DTS Neo:6.
Automatically adjusts beam angle using the microphone.
Manually adjusts the beam angle for precise control.
How to deactivate the automatic standby timer.
Accessing and navigating the manual setup menus.
Adjusts parameters related to sound output.
Adjusts parameters for sound beam output.
Adjusts parameters for audio and video input.
Adjusts parameters related to the unit's display.
Adjusts listening room and position settings.
Sets the unit's installation position relative to walls.
Manually adjusts various sound beam parameters.
Adjusts the horizontal angle of sound beams.
Sets sound beam travel distance and delay.
Sets the focal point distance for sound beams.
Adjusts the high-frequency output level for each channel.
Adjusts sound direction from front channels.
Adjusts the output level of high-frequency or low-frequency sound.
Configures subwoofer output and crossover.
Synchronizes audio output with video signals.
Adjusts dynamic range compression for digital audio.
Enables or disables the bass sound enhancer.
Sets how the unit detects input signals.
Adjusts the input level for audio and video signals.
Allows renaming input sources for easier identification.
Configures HDMI audio/video output and control.
Selects multi-channel or 2-channel audio output.
Shows current HDMI input signal resolution or errors.
Adjusts brightness and dimming of the front panel.
Adjusts the on-screen display position and time.
Changes the unit of measurement for distances.
Accessing menus to adjust unit operations and customization.
How to program the remote to control other components.
General instructions for operating connected devices.
Using the remote to control TV power and input.
Using the remote for DVD player functions.
Using the remote for STB functions.
Using the remote for VCR playback functions.
Automating sequences of operations with one button.
Programming macros for TVs with tuning functions.
How to execute programmed macros.
Steps to remove programmed macros.
Common issues and solutions for unit operation.
Problems related to remote control functionality.
Troubleshooting HDMI connection and HDCP errors.
Concise steps for installing the unit.
Quick steps for connecting TV and DVD player.
Simplified procedure for IntelliBeam auto setup.
Simplified steps for enjoying surround sound.
General
