Yamatake DMC10 Series User Manual

Digital Controller SIO Driver
GP-Pro EX Device/PLC Connection Manual
11
 Device Setting
To display the setting screen, click ([Setting]) of the External Device you want to set from [Device-Specific
Settings] of [Device/PLC Settings].
 Settings of External Device
To configure communication settings for the External Device, use the PARA, ENT, Down and Up keys on the
front of the Controller. Refer to your Controller manual for details.
 Procedure
1 In operation mode, press and hold the PARA key (for 3 seconds) to move to parameter mode.
2 In parameter mode, press and hold the PARA key (for 3 seconds) to move to setup mode.
3 Press the PARA key several times to display the desired setup item.
4 Use the Down/Up keys to select a setting. (The set value will blink.)
5 When no operation is performed for 2 seconds, the set value stops blinking and the change is fixed.
6 Press and hold the PARA key (for 3 seconds) to move to the basic display.
 Settings
Setup Items Settings
C22 1
C23 0
• The parameters to be set vary depending on the Controller. Refer to your Controller manual
for details.

Yamatake DMC10 Series Specifications

General

Brand	Yamatake
Model	DMC10 Series
Category	Controller
Language	English