Digital Controller SIO Driver
GP-Pro EX Device/PLC Connection Manual
76
4.2 Settings in Off-Line Mode
Communication Settings
To display the setting screen, touch [Device/PLC Settings] from [Peripheral Equipment Settings] in off-line mode.
Touch the External Device you want to set from the list that appears.
• Refer to the Maintenance/Troubleshooting manual for information on how to enter off-line
mode or about the operation.
Cf. Maintenance/Troubleshooting Manual "Off-line Mode"
• The number of the setup items to be displayed for 1 page in the off-line mode depends on the
Display in use. Please refer to the Reference manual for details.
Setup Items Setup Description
SIO Type
Select the SIO type for communicating with the External Device.
In the communication settings, set [SIO Type] correctly according to the serial interface
specifications of the Display.
If you select an SIO type that the serial interface does not support, proper operation cannot
be guaranteed. Refer to your Display manual for details on the serial interface
specifications.
Speed Select the communication speed between the External Device and the Display.
Data Length Select a data length.
Parity Select how to check parity.
Stop Bit Select a stop bit length.
Continued to next page.
To Next Page
Loading...
Need help?
General
