Yamatake DMC10 Series User Manual

Digital Controller SIO Driver
GP-Pro EX Device/PLC Connection Manual
77
 Device Setting
To display the setting screen, touch [Device/PLC Settings] from [Peripheral Equipment Settings]. Touch the
External Device you want to set from the list that appears, and touch [Device Settings].
Flow Control
Displays the communication control method to prevent overflow of transmission and
reception data.
Timeout
Enter the time (s) for which the Display waits for a response from the External Device,
from "1 to 127".
Retry
In case of no response from the External Device, enter how many times the Display
retransmits the command, from "0 to 255".
Wait To Send
Enter the standby time (ms) from when the Display receives packets until it transmits the
next command, from "0 to 255".
Setup Items Setup Description
Device/PLC Name
Select the External Device to set. Device name is the title of the External Device set with
GP-Pro EX. (Initial value [PLC])
Series Displays the model of the External Device.
Device Address Enter the address of the External Device, from "1 to 127".
Sub Address
Enter "0" to communicate with the External Device.
If you communicate with the child station (External Device) via the parent station
(CMC10B, DMC10, or DMC50), however, enter "1 to 31" for the child station address.
Setup Items Setup Description

Yamatake DMC10 Series Specifications

General

Brand	Yamatake
Model	DMC10 Series
Category	Controller
Language	English