16
Identification of Parts
⑧ ESCAPE key:
Key to cancel the latest entry and recover the status was valid prior to
the making the selection.
⑨ Main display:
It displays temperature measurements, set values (temperature time,
hour, etc.), program information, error information, etc.
⑩ Sub display:
It displays set temperature, remaining time, current hour and
execution segment No. etc.
⑪ Operation monitor:
It indicates an operation mode.
⑪a STANDBY lamp:
It flashes to indicate that instrument is in the preoperational standby
mode.
⑪b Temperature
pattern lamp:
It illuminates to indicate the heat treatment process pattern executed
by the controller with flashing light indicating the point currently in
execution.
⑪c OVER lamp:
It flashes to indicate the end of auto-stop or program operation.
⑪d TROUBLE lamp:
It blinks when an error is detected and displays the corresponding
code for that particular problem.
⑪e REMOTE operation
indicator lamp:
It illuminates when the instrument is put into remote operation
(optional) and displays the word “REMOTE”.
⑪f KEY LOCK indicator
lamp:
It illuminates to indicate that the operation panel key lock function is in
operation.
⑫ Operation menu
indicator lamp:
It illuminates to indicate the active operation mode in the operation
menu.
⑬ Sub display menu
indicator lamp:
It illuminates to indicate the item (set temperature, remaining time,
hour or execution segment) shown in the sub display.
⑭ HEAT ON indicator
lamp:
It illuminates when the heater is on.
⑮ TIME indicator
lamp:
It illuminates when the operation starting time if the auto-start and the
operation completion time if the auto-stop is set in the hour setting
mode.
⑯ Independent
Temperature
Overheating
Prevention Device:
Setting the instrument to the operation temperature of the
independent over rising prevention.
⑰ Differential
pressure gage:
It illuminates to indicate the difference HEPA filter. It help you to
decide the time for exchanging.
⑱ Exhaust damper
knob:
It is the adjustment knob of width of exhaust damper. The indication
value is a standard.
To Next Page
Loading...
