21
4. OPERATION PROCEDURE
Auto Stop Operation
Press to start operation.
OPERATE and HEATER lamps light and temperature
begins building.
Press at any time during operation to
monitor remaining time in the lower display.
Remaining time display (timer):
Stop time display (clock):
Press
again or wait about 10 seconds for
screen to return to normal reading.
1) When timer runs out or when stop time is
reached operation stops, lower display reads
.
2) Press to clear from display.
When operation stops, and is cleared
start screen is restored.
Fan continues running regardless of whether
operation is stopped. Press and hold
to turn off control panel and stop fan.
To Next Page
Loading...
