Yamato DKN612C - User Manual

56 pages

Save Page as PDF

To Next Page

Forced Convection Oven

Models

DKN302C/402C/412C

DKN602C/612C

DKN812C

DKN912C

Instruction Manual

First Edition

● Thank you for choosing DKN-C series Forced

Convection Ovens from Yamato Scientific Co., Ltd.

● For proper equipment operation, please read and become

thoroughly familiar with this instruction manual before

use. Always keep equipment documentation safe and

close at hand for convenient future reference.

Warning: Read instruction manual warnings and

cautions carefully and completely

before proceeding.

Yamato Scientific America Inc．

Santa Clara，CA

Printed on recycled paper

Main Page

Other manuals for Yamato DKN612C

Manual48 pages

Questions and Answers

J
Justin RyanAug 6, 2025
Why temperature in chamber does not rise in my Yamato DKN612C Convection Oven?
- A
  ashleykingAug 6, 2025
  If the temperature in the chamber of your Yamato Convection Oven does not rise, check the following: * Ensure the temperature setting is higher than the current chamber temperature. * Verify that the power supply voltage hasn't dropped. * Confirm the external temperature is within the operable range (5°C~35°C). * Make sure the chamber isn't overloaded with too many samples.
W
williamscarolAug 20, 2025
Why does the temperature fluctuate during operation of my Yamato DKN612C Convection Oven?
- M
  Megan DennisAug 20, 2025
  If the temperature fluctuates during the operation of your Yamato Convection Oven, consider the following: 1. Check if the temperature setting is appropriate for your needs. 2. See if the power supply voltage has dropped. 3. Determine if there are large fluctuations in the external temperature. 4. Make sure that the chamber isn't overloaded with too many test samples.

Summary

Safety Precautions

Explanation of Symbols

Symbol Glossary

Warnings & Cautions

Lists critical warnings and cautions for safe operation, including handling power cables and substances.

Pre-Operation Procedures

Installation Precautions & Preparations

Outlines essential steps and considerations before installing and operating the unit safely.

Operation Procedures

Operation Modes and Functions

Details the different operational modes available for the oven and their primary functions.

Overheat Prevention Device Setup

Describes the setup and function of the overheat prevention device for safety and unit protection.

Mode & Function Flow

Constant Temperature Mode

Explains how to set up and operate the oven in a constant temperature setting mode.

Constant Temperature + Quick Auto Stop Mode

Auto Stop Mode

Auto Start Mode

Programmed Operation

Guides users on setting up and running multi-step temperature and time programs.

Building Programs

Other Functions: Calibration Offset

Handling Precautions

General Handling Precautions

Lists essential safety precautions for handling the equipment, including hazardous substances and operational risks.

Maintenance Procedures

Inspection and Maintenance

Error Codes

Reading Error Codes

Explains how to interpret error codes displayed on the control panel and their potential causes.

Troubleshooting

Troubleshooting Guide

Offers solutions for common operational issues and symptoms encountered with the unit.

Yamato DKN612C Specifications

General

Model	DKN612C
Brand	Yamato
Category	Convection Oven
Internal Dimensions (W x D x H)	450 x 450 x 450 mm
External Dimensions (W x D x H)	680 x 730 x 880 mm
Maximum Load per Shelf	15 kg
Power Consumption	1.4 kW
Weight	65 kg
Shelves	2
Power Supply	AC 220V 50/60 Hz
Timer	1 minute to 99 hours 59 minutes
Timer Range	1 minute to 99 hours 59 minutes