Yamato DKN812C User Manual

56 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Forced Convection Oven

Models

DKN302C/402C/412C

DKN602C/612C

DKN812C

DKN912C

Instruction Manual

First Edition

● Thank you for choosing DKN-C series Forced

Convection Ovens from Yamato Scientific Co., Ltd.

● For proper equipment operation, please read and become

thoroughly familiar with this instruction manual before

use. Always keep equipment documentation safe and

close at hand for convenient future reference.

Warning: Read instruction manual warnings and

cautions carefully and completely

before proceeding.

Yamato Scientific America Inc．

Santa Clara，CA

Printed on recycled paper

Table of Contents

Other manuals for Yamato DKN812C

Questions and Answers:

N
natalie20Aug 6, 2025
Why temperature in chamber does not rise in my Yamato DKN812C Convection Oven?
- M
  mckinneyalexisAug 6, 2025
  If the temperature in the chamber of your Yamato Convection Oven does not rise, check the following: * Ensure the temperature setting is higher than the current chamber temperature. * Verify that the power supply voltage hasn't dropped. * Confirm the external temperature is within the operable range (5°C~35°C). * Make sure the chamber isn't overloaded with too many samples.
S
Sandra FreemanAug 22, 2025
Why does the temperature fluctuate during operation of my Yamato Convection Oven?
- N
  nbarnettAug 22, 2025
  If the temperature fluctuates during the operation of your Yamato Convection Oven, consider the following: 1. Check if the temperature setting is appropriate for your needs. 2. See if the power supply voltage has dropped. 3. Determine if there are large fluctuations in the external temperature. 4. Make sure that the chamber isn't overloaded with too many test samples.

Yamato DKN812C Specifications

General

Brand	Yamato
Model	DKN812C
Category	Convection Oven
Language	English

Summary

SAFETY PRECAUTIONS

Explanation of Symbols

Defines symbols used in the manual and on equipment for safe operation.

Warnings & Cautions

Lists critical warnings and cautions for safe operation and handling of the unit.

PRE-OPERATION PROCEDURES

Installation Precautions & Preparations

Details essential steps and precautions before installing and operating the unit.

OPERATION PROCEDURES

Overheat Prevention Device Setup

Details how to set and configure the overheat prevention temperature for safety.

Constant Temperature Mode

Constant Temperature + Quick Auto Stop Mode

Auto Stop Mode

Auto Start Mode

Programmed Operation

Guides on running combined temperatures, times, and modes for complex operations.

Calibration Offset

HANDLING PRECAUTIONS

General Handling Precautions

Covers essential safety measures like avoiding hazardous substances and operating with abnormalities.

ERROR CODES

Reading Error Codes

Explains how to interpret error codes displayed by the unit and their potential causes.

TROUBLESHOOTING

Troubleshooting Guide

Offers solutions for common operational symptoms and problems encountered with the unit.

SPECIFICATIONS

Specifications Overview

Presents a table of technical specifications for all DKN-C series oven models.

HAZARDOUS SUBSTANCES LIST

Hazardous Substances List

Categorizes and lists hazardous substances that should not be processed in the unit.

Related product manuals

Preview: Yamato DKN400

Preview: Yamato DKN302C

Preview: Yamato DKN 302