Why temperature in chamber does not rise in my Yamato Convection Oven?
If the temperature in the chamber of your Yamato Convection Oven does not rise, check the following: * Ensure the temperature setting is higher than the current chamber temperature. * Verify that the power supply voltage hasn't dropped. * Confirm the external temperature is within the operable range (5°C~35°C). * Make sure the chamber isn't overloaded with too many samples.
Why does the temperature fluctuate during operation of my Yamato Convection Oven?
If the temperature fluctuates during the operation of your Yamato Convection Oven, consider the following: 1. Check if the temperature setting is appropriate for your needs. 2. See if the power supply voltage has dropped. 3. Determine if there are large fluctuations in the external temperature. 4. Make sure that the chamber isn't overloaded with too many test samples.
Lists critical warnings and cautions for safe operation and preventing hazards.
Covers essential precautions for grounding, site selection, and installation.
Defines various operational modes like Fixed Temp, Auto Stop, and Programmed Operation.
Details how to set and configure the overheat prevention system.
Describes the procedure for operating the oven in constant temperature mode.
Guides on setting and running multi-step temperature and time programs.
Warns against processing explosive or flammable materials.
Lists error codes, symptoms, and possible causes for self-diagnostic functions.
Provides checks for common issues like unit not turning on or temperature not rising.
General| Internal Dimensions (W x D x H) | 450 x 450 x 450 mm |
|---|---|
| Shelves | 2 |
| Weight | Approx. 51 kg |
| Rotisserie | No |
| Power Supply | AC220V 50/60Hz |
| Maximum Power Consumption | 2.5 kW |
| Power | 2.5 kW |
To Next Page
