To Next PageTo Next Page
Need help?Do you have a question about the Yamato DKN810 and is the answer not in the manual?
General| Temperature Range | Ambient +5 to 260 °C |
|---|---|
| Timer | 1 min to 99 hr 59 min |
| Weight | Not available |
| Capacity | Not available |
| Power | 1.4 kW |
Explains the purpose and types of symbols used in safety warnings and precautions.
Advises against using the unit in areas with flammable or explosive gases due to potential fire or explosion.
Specifies grounding procedures and power source requirements for DKN400/600 and DKN810/900 models.
Warns against using flammable gases or substances near the unit to prevent explosion or fire.
Prohibits unit modification and mandates installation on a flat, stable surface for proper operation.
Details the buttons, lamps, and displays on the control panel and their respective functions.
Details the automatic and manual overheat prevention functions and their settings.
Provides a step-by-step guide to setting the overheat prevention temperature for the unit.
Explains how to start, stop, and correct settings for the fixed temperature operation mode.
Describes the available program types and the initial steps for inputting a program.
Covers major warnings such as avoiding flammable substances and handling the door cautiously.
Explains common error codes, their notifications, and potential causes/solutions.
Lists detailed technical specifications including temperature range, accuracy, heater power, and dimensions for DKN models.
