Yamato DKN412C User Manual

Forced Convection Oven
Models
DKN302C/402C/412C
DKN602C/612C
DKN812C
DKN912C
Instruction Manual
First Edition
● Thank you for choosing DKN-C series Forced
Convection Ovens from Yamato Scientific Co., Ltd.
● For proper equipment operation, please read and become
thoroughly familiar with this instruction manual before
use. Always keep equipment documentation safe and
close at hand for convenient future reference.
Warning: Read instruction manual warnings and
cautions carefully and completely
before proceeding.
Yamato Scientific America Inc．
Santa Clara，CA
Printed on recycled paper

Yamato DKN412C Specifications

General

Brand	Yamato
Model	DKN412C
Category	Convection Oven
Language	English

Summary

Safety Precautions and Symbol Explanations

Critical Safety Warnings

Lists critical warnings for safe operation, covering hazards like fumes, grounding, and abnormal conditions.

Additional Safety Cautions

Provides further safety warnings regarding moving units and operating during thunderstorms.

Pre-Operation Procedures and Installation

Installation Precautions and Preparations

Covers essential steps before operating, including grounding, site selection, and electrical setup.

Site and Equipment Handling Precautions

Details precautions like not disassembling, installing on a level surface, and rack loading.

Power and Stabilization Procedures

Details power source connection, unit stabilization, and initial operation quirks.

Rack Placement and Cable Management

Explains rack placement, handling of power cables, and connecting to power.

Component Identification and Control Panel

Control Panel Overview and Functions

Operational Procedures and Functions

Overview of Operation Modes and Functions

Introduces various operation modes and key functions like overheat prevention.

Mode and Function Flowchart

Overheat Prevention Device Setup

Explains how to configure the overheat prevention settings for safety.

Constant Temperature Mode Operation

Quick Auto Stop Mode Operation

Auto Stop Mode Operation

Auto Start Mode Operation

Programmed Operation and Building Programs

Calibration Offset and Keypad Lock

Handling Precautions and General Care

Hazardous Substances and Sample Precautions

Covers warnings about hazardous substances, sample moisture, and abnormal operation.

Equipment Handling and Operational Cautions

Lists cautions regarding climbing, thunderstorms, hot surfaces, door operation, and corrosive substances.

Sample Distribution and Operational Limits

Troubleshooting and Service Information

Error Code Reference

Explains how error codes are displayed and lists common error codes and their causes.

Troubleshooting Common Operational Issues

Provides a guide to diagnose and resolve common operational problems.

Hazardous Substances List