To Next PageTo Next PageWhy does my Yamato Furnace take so long to heat up?
If your Yamato Furnace takes too long to reach the desired temperature, it might be due to a faulty temperature sensor, which requires replacement. Alternatively, the issue could stem from an inadequate power supply; ensure you are using an appropriate power source.
What to do if Yamato Furnace doesn't start?
If your Yamato Furnace doesn't start when you turn it on, it could be due to a faulty earth leakage breaker, which should be replaced. Also, check the power source; ensure it's appropriate for the device.
What to do if heater is not turned off in Yamato Furnace?
If the heater in your Yamato Furnace isn't turning off after reaching the preset temperature, the SSR (Solid State Relay) might be faulty and needs to be replaced.
Why does the thermal fuse blow out in my Yamato Furnace?
If the thermal fuse in your Yamato Furnace keeps blowing out, it might be due to a malfunctioning fan, which needs to be replaced.
How to fix temperature not rising in Yamato Furnace?
If the temperature in your Yamato Furnace is not rising, it could be because the heater is disconnected and needs to be replaced.
Explains the meaning of warning and caution symbols used in the manual.
Lists and explains various warning, caution, prohibition, and compulsion symbols.
Explains critical safety matters related to warnings and cautions for safe operation.
Details the necessary conditions and precautions for installing the unit.
Describes the physical components of the Muffle Furnace, including plates, switches, and ports.
Explains the function of each key, lamp, and display on the control panel.
Lists and explains the characters and identifiers used by the VS4 controller.
Lists and briefly describes the available operation modes and their functions.
Provides a flowchart illustrating key operations and character displays for various modes.
Explains the procedure for setting and operating the unit in fixed temperature mode.
Explains how to set a timer for automatic stop during fixed temperature operation.
Explains the procedure for setting an automatic stop time for fixed temperature operation.
Explains the procedure for setting an automatic start time after power on.
Explains how to change temperature according to setting temperature and time.
Shows graphs of temperature rise and fall characteristics for specific device types.
Provides a form for preparing program patterns, including register with and project name.
Provides a form for inputting program values like temperature, time, and repeat function.
Details various auxiliary functions like overheating prevention, calibration, and lock.
Lists critical safety warnings regarding problems, substances, and operational cautions.
Covers precautions for furnace, door, heater, sensor, and operation with N2 gas to prevent damage or malfunction.
Explains the importance and steps for daily inspection and maintenance of the unit.
Describes monthly maintenance tasks, including checking the earth leakage breaker and overheating prevention device.
Provides instructions for long-term storage, disposal, and environmental protection considerations.
Explains the automatic diagnosis function, error codes, and their causes/solutions.
Lists common problems, their possible causes, and solutions for troubleshooting.
Explains how to request repair, necessary information, and the minimum retention period for parts.
Provides technical specifications for Muffle Furnace models FO100, FO200, FO300, FO310, and FO410.
Provides technical specifications for Muffle Furnace models FO510, FO610, FO710, and FO810.
Lists optional accessories available for the Muffle Furnace models with product codes.
Shows the wiring diagram for the FO100 Muffle Furnace model.
Shows the wiring diagram for the FO200 and FO300 Muffle Furnace models.
Shows the wiring diagram for the FO310, FO410, and FO510 Muffle Furnace models.
Shows the wiring diagram for the FO610, FO710, and FO810 Muffle Furnace models.
Lists common parts, their codes, specifications, and manufacturers.
Lists replacement parts specific to the FO100 Muffle Furnace model.
Lists replacement parts specific to the FO200 Muffle Furnace model.
Lists replacement parts specific to the FO300 Muffle Furnace model.
Lists replacement parts specific to the FO310 Muffle Furnace model.
Lists replacement parts specific to the FO410 Muffle Furnace model.
Lists replacement parts specific to the FO510 Muffle Furnace model.
Lists replacement parts specific to the FO610 Muffle Furnace model.
Lists replacement parts specific to the FO710 Muffle Furnace model.
Lists replacement parts specific to the FO810 Muffle Furnace model.
Lists dangerous substances that should not be used in the unit to prevent hazards.
General