38
Specification
FO510/610/710/810
FO510 FO610 FO710 FO8100
Operating temperature
range
100 to 1150℃
Temperature
adjustment accuracy
±2℃ (@1150℃)
Time required to reach
highest temperature
@LT:1150℃(@RT:850℃)
Approx.
80min.(60min.)
Approx.
80min.(65min.)
Approx.
80min.(55min.)
Approx.
80min.(60min.)
Temperature
control system
PID control by VS4 controller
Sensor R thermocouple (W sensor)
Temperature
setting system
Digital setting
Temperature
display system
Digital display
Functions for Operation
・Fixed temperature operation
・Timer operation (Auto stop, Auto start)
・Program operation
(Max 6patterns: 30steps×1pattern, 15steps×2patterns or 10steps×3patterns)
Additional function Lock function, Auto recovering after power failure, Calibration offset
Safety device
Earth leakage/circuit breaker, Thermal fuse, Overheating prevention device,
Self-diagnostic functions (Sensor error, Memory error, Heater disconnection, SSR
short circuit)
Iron chrome wire (Cantal AF)
Heater
2.2KW 2.5KW 3.0KW 4.0KW
Cooling fan Axial fan motor
Furnace unit Ceramic fiber
Operating ambient
temperature range
5 to 35℃
Internal dimensions
(W×D×H mm)
300×250×150 250×350×200 270×350×250 300×400×250
External dimensions
(W×D×H mm)
506×505×626 506×605×676 506×605×726 506×655×726
Internal capacity Approx. 11.3L Approx. 17.5L Approx. 23.6L Approx. 30L
200V AC single phase
Power supply
(50/60Hz)
13.5A 16A 18.5A 21A
Power cord 3 wires with rounded terminal
Weight Approx. 44Kg Approx. 52Kg Approx. 58Kg Approx. 62Kg
Fuse
×1 ×1 ×1 ×1
Attached
accessories
Other Instruction manual
The value for performance is under the ambient temperature of 23℃±5℃, the humidity of 65％RH±20％,
and without load.
The projection is not included for external dimensions.
To Next Page
Loading...
