Yamato FP102 User Manual

75 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Muffle Furnace

FP102/302/312/412

Instruction Manual

First Edition

● Thank you for purchasing “Muffle Furnace FP

series” of Yamato Scientific Co., Ltd.

● This product has not been designed for medical

applications. Use this as a laboratory drying

sterilizer only.

● In order to use this Equipment properly, please

read this Instruction Manual and Warranty Card

thoroughly before use. Keep them in safe place

close to this Equipment so that you can refer to

them any time.

Warning: Please read the important warning

notes in this Manual carefully and

thoroughly, and get the good

understanding of their contents

before using this Equipment.

Yamato Scientific America Inc．

Santa Clara，CA

Printed on recycled paper

Table of Contents

Questions and Answers:

K
karen51Aug 4, 2025
Why is the Yamato FP102 temperature display unstable?
- D
  David NormanAug 4, 2025
  The temperature display on your Yamato Furnace might be unstable due to several reasons: * Heavy fluctuations in ambient temperature. In this case, you should review the location of the furnace. * Failure in the supplied power (the required voltage is ±10%). If so, connect the furnace to an adequate power supply. * Controller failure. If this is the case, replace the controller. * Temperature sensor failure. If so, replace the temperature sensor. * The furnace may be affected by the samples.
T
timothysmithAug 13, 2025
What to do if my Yamato Furnace doesn't display anything on the screen?
- C
  Christopher McgeeAug 13, 2025
  If your Yamato Furnace isn't displaying anything on either the top or bottom screen when the controller power key is pressed and held, it could be due to: * Failure in the supplied power (the required voltage is ±10%). Connect the furnace to an adequate power supply. * Controller failure. If so, replace the controller.
J
Jeffrey ThompsonAug 23, 2025
How to fix the Yamato FP102 when the current time is not displayed?
- A
  Angela MillerAug 25, 2025
  If the current time is not displayed on the bottom screen of your Yamato Furnace when the Earth Leakage Breaker (ELB) is ON, it could be due to: * No power supply. Check the connection to the power supply and apply power. * A failed ELB. Replace the ELB. * Controller failure. Replace the controller.

Yamato FP102 Specifications

General

Brand	Yamato
Model	FP102
Category	Furnace
Language	English

Summary

Safety Precautions

Symbols and Risk Information

Explains warning symbols, their meanings, and lists residual risks.

Residual Risk Details

Before Operating the Equipment

Installation Precautions

Details site selection, leveling, ventilation, power, and grounding requirements.

Operating Procedure

Setup, Modes, and Configuration

Precautions on Handling

Handling Warnings and Cautions

Provides essential warnings for safe handling, operation, and material processing.

Maintenance Method

Inspection and Maintenance Procedures

When a Trouble Occurs

Error Codes and Troubleshooting

Lists error codes, causes, solutions, and general troubleshooting guidance.

Specifications

Related product manuals

Preview: Yamato FO 100