5
1. Safety Precaution
List of residual risks
Protective measures to be implemented
by the machine users
Do not attempt to climb on the unit.
Do not put any objects on the unit.
Do not use a unit with stacking on another
unit.
Turn the ELB off when thunder is heard.
Use the unit at the appropriate temperature
(within the temperature control range).
Take care for the temperature in the furnace
after operation is completed.
Fire
Damage to the
furnace body
Place specimens on the furnace floor plate.
Fire and
electrical shock
Take care for the handling of specimens.
Make a temperature setting for the
standalone overheat preventive unit.
Take care not to allow your finger to be
pinched in the fan at the back of the unit.
Inspect the ELB and the standalone overheat
preventive unit at regular intervals.
During inspection and maintenance
Protective measures to be implemented
by the machine users
Remove the power cord before inspection or
maintenance.
Start maintenance only after the device has
returned to the normal temperature.
Do not attempt to disassembly the devices.
When you are not going to use the unit for a long time or when discarding the unit
Protective measures to be implemented
by the machine users
Turn power off and remove the power cord.
Do not leave the unit at a place where
children may play.
Remove the door apart to prevent it from
closing before disposing of.
To Next Page
