Yamato FP102 - How to Copy or Delete Programs

37
4. Operating procedure
How to copy or delete programs
1-1
※ Copying a program
Use the key to flash [
COPYP
] on the Bottom
screen and press the key.
1-2
When [
01
] of
PGM
:01
flashes, input the patter
number to copy from with the keys
and then determine using the key.
1-3
[
DEST
] flashes on the Top screen shows while
pattern numbers not used and [
＊＊
] of
PGM
:
＊＊
flash on the Bottom screen and input a pattern
number [
＊＊
] of the copy destination with the
keys and determine using the
key.
1-4
↓
The Top screen shows [ ] and the Bottom
screen shows the pattern number of the copy
source- copy destination number [01-02] then the
screen will move to the program copy screen.