Yamato FP102 - Specifications

61
10. Specifications
Specifications
Model
FP102
FP302
FP312
FP412
Safety Device
Self-diagnosis Functions (Temp. Sensor Failure Detection, TRIAC
Short Circuit, Heater Line Disconnection,
Main Relay Failure Detection, Automatic Overheat Prevention）
Key Lock Function, Independent Overheat Prevention Device, ELB
Standard
Internal dimensions (mm) ※
2
W100×D150
×H100
W200×D250×H150
W300×
D250×H150
External dimensions (mm)
※2
W376×D404
×H515
W446×D504×H565
W506×
D504×H625
Internal capacity (L)
1.5
7.5
11.3
Power supply (50/60Hz)
Single phase AC115V
Single phase AC220V
Rated current
10A(15A)
21.5A(30A)
13A(15A)
18A(20A)
Weight
Approx. 29kg
Approx. 43kg
Approx. 51kg
Accessori
es
Exhaust port cap
1
Fuse
1
Furnace floor plate
1
Instruction manual
1 copy
V-type quick manual
1 copy
Warranty card
1 copy
Articles
※ The length of the power cord outside the unit is about 2ｍ.
※1 Performances have been measured at the rated source voltage,
single phase 115V or 220V±5%, room temperature of 23℃±
5℃, humidity of 65%RH±20%, voltage of 86kPa～106kPa, and
at no-load.
※2 Measurement conditions: FP102 is at 3 points in the bath,
FP302,312, and 412 are compliant with JIS.
※3 Protrusions are excluded.