SPECIFICATIONS
94 2V Operation Manual
Engine General Specifications
Note:
1. The information described in Principal Engine Specifications is for a “standard” engine. To obtain the
information for the engine installed in your driven machine, please refer to the manual provided by the
driven machine manufacturer.
2. Engine rating conditions are as follows (SAE J1349, ISO 3046/1):
• Atmospheric Condition: Room temperature 77°F (25°C), Atmospheric pressure 29.53 in Hg (100 kPa,
750 mm Hg), Relative humidity 30%
• Fuel Temperature at Fuel Injector Pump Inlet: 104°F (40°C)
• With Cooling Fan, Air Cleaner, Muffler: Yanmar Standard
• After Engine Break-In Period. Output Allowable Deviation: ± 3%
• 1 PS = 0.7355 kW
• 1 hp SAE (Society of Automotive Engineers)= 0.7457 kW
Type V-Twin, Vertical Crankshaft 4-Cycle, Water Cooled Diesel Engine
Combustion System Swirl Pre-Combustion
Starting System Electric Starting
Cooling System Radiator
Lubricating System Forced Lubrication With Trochoid Pump
PTO Position Opposite of Flywheel Side
Direction of Rotation Counterclockwise Viewed from Opposite of Flywheel Side
To Next Page
