EasyManua.ls Logo

Yanmar 2V Series - LONG TERM STORAGE; BEFORE YOU PLACE THE ENGINE IN LONG TERM STORAGE

Yanmar 2V Series
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PERIODIC MAINTENANCE
2V Operation Manual
73
If the engine still will not start after charging,
have your authorized Yanmar industrial engine
dealer or distributor check the battery and the
engine’s starting system.
If operating the machine where the ambient
temperature could drop to 5°F (-15°C) or less,
remove the battery from the machine at the end
of the day. Store the battery in a warm place
until the next use. This will help start the engine
easily at low ambient temperatures.
Replace Engine Oil and Engine Oil
Filter
The engine oil on a new engine becomes
contaminated from the initial break-in of internal
parts. The initial 50 hour engine oil and oil filter
change are very important.
CAUTION
Only use the engine oil specified.
Other engine oils may affect warranty
coverage, cause internal engine
components to seize, and / or shorten
engine life.
Prevent dirt and debris from
contaminating the engine oil. Carefully
clean the oil cap / dipstick and the
surrounding area before you remove
the cap.
NEVER mix different types of engine
oil. This may adversely affect the
lubricating properties of the engine oil.
NEVER overfill. Overfilling may result
in white exhaust smoke, engine
overspeed, or internal damage.
0000005en
A WARNING
BURN HAZARD!
If you must drain the engine oil while it
is still hot, stay clear of the hot engine
oil to avoid being burned.
ALWAYS wear eye protection.
Failure to comply could result in death
or serious injury.
0000011en

Table of Contents

Related product manuals