Yanmar 3TNV82A - Specifications: Engine Performance Data; Engine Speed Specifications; General Engine Specifications

SPECIFICATIONS
106
TNV Operation Manual
Engine Speed Specifications
VH: Variable High Speed
VM: Variable Medium Speed
CH: Constant High Speed
CL: Constant Low Speed
Engine General Specifications
Notes:
1. The information described in Principal Engine Specifications is for a “standard” engine. To obtain the
information for the engine installed in your driven machine, please refer to the manual provided by
the driven machine manufacturer.
2. Engine rating conditions are as follows (SAE J1349, ISO 3046/1):
• Atmospheric Condition: Room temperature 77°F (25°C), Atmospheric pressure 29.53 in Hg (100 kPa,
750mm Hg), Relative humidity 30%
• Fuel Temperature at Fuel Injector Pump Inlet: 104°F (40°C)
• With Cooling Fan, Air Cleaner, Muffler: Yanmar Standard
• After Engine Break-In Period. Output Allowable Deviation: ± 3%
• 1 PS = 0.7355 kW
• 1 hp SAE (Society of Automotive Engineers) = 0.7457 kW
NOTATION AVAILABLE ENGINE SPEED INTENDED USES
VH 3200 ~ 3600 rpm (min
-1
) Lawn Mower, Construction, Industrial Machine
VM 2000 ~ 3000 rpm (min
-1
) Agricultural, Constructive, Industrial Machines
CH 3000 ~ 3600 rpm (min
-1
) 2-pole Generator Sets, Irrigation Pumps
CL 1500 or 1800 rpm (min
-1
) 4-pole Generator Sets, Irrigation Pumps
Type Vertical Inline, Water Cooled, 4-Cycle Diesel Engine
Combustion System Direct Injection Models Direct Injection
Indirect Injection Models Swirl Chamber (Ball Type)
Starting System Electric Starting
Cooling System Radiator
Lubricating System Forced Lubrication With Trochoid Pump
PTO Position Flywheel End
Direction of Rotation Counterclockwise Viewed from Flywheel Side