Yanmar 3TNV82A - Safety: Electrical, Servicing, and Movement Hazards; Shock Hazard During Electrical Work; Sever Hazard During Engine Servicing; Burn Hazard from Hot Coolant

SAFETY
8
TNV Operation Manual
A WARNING
0000009en
SHOCK HAZARD!
• Turn off the battery switch (if
equipped) or disconnect the negative
battery cable before servicing the
electrical system.
• Check the electrical harnesses for
cracks, abrasions, and damaged or
corroded connectors. ALWAYS keep
the connectors and terminals clean.
• Failure to comply could result in death
or serious injury.
A WARNING
0000010en
SEVER HAZARD!
• Stop the engine before you begin to
service it.
• NEVER leave the key in the key switch
when you are servicing the engine.
Someone may accidentally start the
engine and not realize you are
servicing it. This could result in a
serious injury.
• If you must service the engine while it
is operating, remove all jewelry, tie
back long hair, and keep your hands,
other body parts and clothing away
from moving / rotating parts.
• Failure to comply could result in death
or serious injury.
A WARNING
0000016en
BURN HAZARD!
• Wait until the engine cools before you
drain the engine coolant. Hot engine
coolant may splash and burn you.
• Failure to comply could result in death
or serious injury.
A WARNING
0000006en
SUDDEN MOVEMENT HAZARD!
• Allow the engine to warm-up for at
least 5 minutes to allow the engine idle
speed to return to normal before
engaging the transmission or any PTO
attachments. Engaging the
transmission or PTO at an elevated
engine speed could result in an
unexpected movement of the
equipment.
• Failure to comply could result in death
or serious injury.