CHECKING THE ENGINE
AFTER OPERATION
• Check that the key switch is in the OFF
position and battery master switch (if
equipped) is OFF.
• Fill the fuel tank. Make sure that the fill cap
and the area around the fill opening are
clean to avoid contamination of the fuel.
• Close seawater cock(s).
• If there is a risk of freezing, check that the
cooling system contains enough coolant.
See Engine Coolant on page 31.
• If there is a risk of freezing, drain the
seawater system. See Draining the
Seawater Cooling System on page 70.
ENGINE OPERATION
36 BY Series Operation Manual
© 2008 Yanmar Marine International
To Next Page
Loading...
