EasyManua.ls Logo

Yanmar 8LV370Z User Manual

Yanmar 8LV370Z
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
8LV320
8LV350
8LV370
8LV320Z
8LV350Z
8LV370Z
0A8LV-G00100
PRINTED IN JAPAN

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Yanmar 8LV370Z and is the answer not in the manual?

Yanmar 8LV370Z Specifications

General IconGeneral
Engine Model8LV370Z
Cylinders8
Rated Output370 hp
Torque750 Nm
Fuel SystemCommon Rail
AspirationTurbocharged
Engine TypeDiesel

Summary

Safety

Safety Precautions

Guidelines and warnings for safe installation, operation, and maintenance of the engine.

Product Overview

Engine Features and Break-In

Details Yanmar 8LV engine features and provides break-in procedures for new engines.

Component Identification

Illustrates and describes the location of major engine components on both service and non-service sides.

Before You Operate

Engine Operation

Starting the Engine

Step-by-step guide for starting the Yanmar 8LV engine.

Engine Failures and Warm-up Mode

Addresses engine starting failures, post-start checks, and warm-up procedures.

Throttle and Shift Control

Explains how to operate the throttle and shift controls for the marine engine.

Cautions During Operation

Important warnings and precautions to observe during engine operation.

Shutting Down the Engine

Outlines the correct procedures for normal engine shutdown.

Periodic Maintenance

Periodic Maintenance Procedures

Step-by-step instructions for performing daily checks and other maintenance tasks.

After Initial 50 Hours of Operation

Maintenance tasks to be performed after the first 50 hours of engine operation.

Long-Term Storage

Troubleshooting

Post-Start Troubleshooting

Checks to perform and potential causes if the engine has issues immediately after starting.

Troubleshooting Chart

A chart listing symptoms, probable causes, and measures for engine problems.

Engine Running Issues

Addresses issues like rough running, sudden stopping, and abnormal exhaust colors.

Output and Knocking Issues

Covers symptoms of insufficient engine output and engine knocking.

Turbocharger and Vibration Issues

Addresses turbocharger breakdowns, intake pressure, abnormal vibration, and noise problems.

Failsafe Diagnosis Chart

Details diagnostic trouble codes (DTCs), their descriptions, and corresponding failsafe actions.

Specifications

Principal Engine Specifications

Provides key technical specifications for the Yanmar 8LV series engines.

Related product manuals