Function of parts
36
6 Warm-up
Pull the key switch to and remain it in “ON”, this
indicator will be lit. The engine can be started up after
the indicator is off.
Fuel level indicator
This indicator is used to display the fuel level in the fuel
tank.
Tachometer
This meter is used to indicate the speed and Usage
hours of the engine. Do not change the engine speed,
and remain the hand in the green zone during
operation.
Others
1 Operator’s seat
Move the adjusting pin, and loosen the bolt to adjust
the seat up and down to the position easy for operation.
2 Engine room cover lock lever
Open the engine room cover with force.
Fuel level indicato
Green zone
Usage hours
Tachomete
Adjusting pin
djusting bolt
Lock leve
https://tractormanualz.com/yanmar/
To Next Page
Loading...