Yanmar YM155 - Page 138

the (1) hydraulic cylinder case by the (18) copper
NOTES:
packing 8 (3 pcs) and (17) bolts 8 x 22 (3 pcs),
a)
Ser the punch mark for
the step 3 and step 5
and lock the (17) bolts 8 x 22 (3 pcs) in place
firring.
with (19) wire 0.8 x 220.
I \
Punched mark
b) Tightening rorque:
, NOTE: (21 Be sure rhere is no "play" benveen rhe (6) lifr
[I]
Before step 1, align the center of the hole for rhe crank pin and either the (4) lift crank or the (5) hydraulic
(2) bushing with rhe
center groove line of the (1) hydrau-
piston rod; and benveen the (6) Iff crank pin and the
lic cylinder case
(7) spring pin 5 x 28.