Need help?Do you have a question about the Yaohua Weighing System XK3190-A22 and is the answer not in the manual?
General| Model | XK3190-A22 |
|---|---|
| Category | Scales |
| Display | 6 bits LCD, 6 status indications |
| Accuracy class | III |
| Max. connection number of load cell | 4 |
| Power supply | AC 220V ± 10%, 50Hz |
| Operating Temperature | -10°C to 40°C |
| Storage temperature | -20°C to 60°C |
| Conversion rate | 10 times/second |
| Load cell excitation | 5V DC |
| Interface | RS232 |
| Relative Humidity | ≤ 85% |
Details the front and back views and interface components of the weighing indicator.
Describes the process of powering on the indicator and its automatic zero setting.
Explains how to perform manual or semi-automatic zero adjustments.
Details how to use the tare function to deduct displayed weight.
Instructions for using the counting mode to count items.
Explains how to use the accumulating function for total weight.
Configures the unit of measurement between kilograms (kg) and pounds (Lb).
Sets the communication address for data transmission.
Sets the baud rate for the RS232 communication interface.
Adjusts the digital filter intensity for stable readings.
Configures the output mode for the RS232 serial communication.
Enables or disables the battery saving mode.
Sets the range for automatic zero tracking.
Sets the range for the zero key function.
Sets the zero scope upon indicator initialization.
Controls the backlight of the indicator display.
Covers placement, environmental hazards, static discharge, and cleaning guidelines.
Details power handling, plug/unplug procedures, and interface connection safety.
Outlines the indicator's warranty period and manufacturer's responsibility.
Explains the structure of commands and methods for calculating verification codes.
Describes the format and content of data transmitted from the indicator.
Guides through setting the measurement division (e.g., 1, 2, 5, 10).
Configures the position of the decimal point for readings.
Procedure for setting the maximum weight capacity of the indicator.
Steps to perform the zero calibration with no load on the platform.
Procedure for calibrating the indicator with known weights.
To Next Page