9
Assembly (continued)
7
Attach the Front Panel
Attach the front panel (L) to the bottom panel (A) using
four sets of M6x16 screws (AA), Ø6 lock washers (BB),
and M6 hex nuts (CC).
Attach the front panel (L) to the side panels (C) using six
sets of M6x16 screws (AA), Ø6 lock washers (BB), and
M6 hex nuts (CC).
8
Attach the Corner Plate
Hardware Used
Attach the two corner plates (M) to the side panels (C) and front
panel (L) using four sets of M6x16 screws (AA), Ø6 lock washers
(BB), and M6 hex nuts (CC).
Hardware Used
AA x 4M6x16 Screw
x 4Ø6 Lock WasherBB
x 4M6 Hex NutCC
C
AA BB CC
AA x 10M6x16 Screw
x 10Ø6 Lock WasherBB
x 10M6 Hex NutCC
A
AA BB CC
L
L
C
AA
BB
CC
M