14
Take the following points into account to minimise the
vibration and noise exposure risks:
• Only use the product as intended by its design and
these instructions.
• Ensure that the product is in good condition and well
maintained.
• Keep a tight grip on the handles/gripping surface.
• Maintain this product in accordance with these
instructions and keep it well lubricated (where
appropriate).
• Plan your work schedule to spread any high vibration
tool use across a longer period of time.
ATTENTION
Familiarise yourself with the use of this product by
means of this instruction manual. Memorise the
safety directions and follow them to prevent risks and
hazards.
• Always be alert when using this product, so that
you can recognise and handle risks early. Fast
intervention can prevent serious injury and damage to
property.
• Switch off and disconnect from the power supply if
there is any malfunction. Have the product checked
by a qualied specialist and repaired if necessary,
before the next use.
Residual risks
Even if you are operating this product in accordance
with all the safety requirements, potential risks of
PRODUCT SAFETY WARNINGS
To Next Page
Loading...
Need help?
General
