Yard force SLM34KZD - TROUBLESHOOTING

15
TROUBLESHOOTING
Before performing any maintenance or cleaning work, always pull out the mains plug and
wait until the blade has come to a standstill.
Problem Remedy
Motor does not run
- Check mains connection cable and circuit breaker (fuse).
- Start on short grass or on an area which has already been
mowed.
- Clean discharge channel/housing (the mowing blade
must rotate freely).
- Correct the cutting height.
Motor power drops
- Increase the cutting height.
- Clean discharge chute.
- Have mowing blade resharpened /replaced (customer
service centre).
Grass catcher is not lled
sufciently
- Correct the cutting height.
- Allow the lawn to dry.
- Have mowing blade resharpened /replaced (customer
service centre).
- Clean the grille on the grass catcher.
- Clean the discharge chute.
Wheel drive does not
function (if equipped)
- Adjust the exible cable.
- Check the drive wheels for damage.
Faults which cannot be rectied with the aid of this table may be rectied at an authorized
repair facility.