8 9
• Before clearing blockages or unclogging the chute;
• Before checking, cleaning or working on the lawnmower;
• After striking a foreign object, inspect the lawnmower for damage and make repairs
before restarting and operating the lawnmower;
• If the lawnmower starts to vibrate abnormally, check immediately;
- Stop the engine and disconnect the spark plug wire, make sure that all moving parts
have come to a complete stop before refueling;
ENVIRONMENTAL PROTECTION
Dispose of soiled maintenance material and operating material at the appropriate
collection point. Recycle packaging material, metal and plastics.
SAFETY INFORMATION
Install the handle
1. Attach the lower handle onto the unit by using one bolt and one hand tension knob on
each side.(see Fig.3)
2. Install the upper handle onto the lower handle by using one bolt and one hand tension
knob on each side.(see Fig. 4)
Fig 3
Fitting the cable clip
Ensure that the cable clips supplied are used to x the cable to the lower handle.(see Fig.5)
Fig 5
Fig 4
ASSEMBLY
To Next Page
Loading...
